Cutting Disc Sourcing & OEM Project Support
OEM cut-off wheel sourcing for metal, stainless steel (INOX), cast iron, and masonry applications. Confirm reinforcement, formulation, rated speed, safety documents, MOQ and inspection scope for the exact quoted SKU.
Cut-Off Wheel Specifications and Safety Evidence for B2B Buyers
SCOTTCHEN provides Shanghai-based B2B sourcing and OEM project support for bonded cutting-wheel inquiries. The responsible production source, formulation, reinforcement, rated speed, applicable standard and report coverage must be identified for the exact quoted SKU; this page does not assert an owned factory or manufacturing history.
Cutting wheel safety is non-negotiable, so the RFQ must name the applicable market standard, rated speed, guard and tool compatibility, reinforcement construction, label warnings and required test evidence. For INOX wheels, state the allowed iron, sulfur and chlorine limits and request test evidence for the quoted formulation. Approval should be based on applicable documents and representative samples, not generic marketing claims.
Cut rate, wheel life, burr, temperature and stability depend on formulation, reinforcement, workpiece, tool and operation. Compare candidate SKUs under one approved test method, then record the selected construction, inspection plan, MOQ, lead time, payment and Incoterms in the quotation or contract.
Cutting Wheel Types & Product Range
Metal Cutting-Off Wheels (Type 1 / Type 41)
Type 1 / Type 41 flat cutting-wheel configurations can be evaluated for metal cutting. The buyer must provide the workpiece, section, tool, guard, spindle, operating conditions and target market; formulation, reinforcement, rated speed, cut result and safety evidence are then approved for the exact quoted SKU.
- Flat Type 1/Type 41 profile for straight cutting
- Thickness confirmed by diameter and SKU
- Abrasive formulation confirmed in the approved specification
- Reinforcement and safety evidence verified per SKU
Stainless Steel (INOX) Cutting Discs
INOX cutting-disc configurations can be evaluated for stainless steel and high-alloy applications. The buyer must state any iron, sulfur and chlorine limit, abrasive formulation, target standard and end-use restrictions in the RFQ, then require applicable evidence for the exact quoted SKU.
- Fe, S and Cl limits stated by the buyer
- Formulation and material evidence confirmed per SKU
- Corrosion and heat claims verified by representative test
- Tool, guard and application compatibility approved in writing
Thin Cut-Off Wheels (1.0-1.6mm)
Common ultra-thin inquiry thicknesses include 1.0mm, 1.2mm and 1.6mm. Kerf, cut time, burr, heat, life and stability depend on formulation, reinforcement, workpiece, tool and feed; compare candidates under the same test method and approve only with applicable evidence for the exact SKU.
- Common RFQ thicknesses: 1.0mm, 1.2mm, 1.6mm
- Kerf and cut time measured in the sample test
- Heat, burr and wear recorded under common conditions
- Metal or INOX scope confirmed by formulation and evidence
Depressed Center Cutting Wheels (Type 27)
A depressed-center cutting-wheel inquiry must identify the wheel type, permitted use, tool, guard, flange, thickness and rated speed. Do not use a cutting wheel for side grinding unless the exact product label, responsible producer and applicable safety documents explicitly permit that operation.
- Depressed-center profile confirmed by SKU
- Thickness and permitted operation stated on approved label
- Tool, guard and flange compatibility checked
- Metal or INOX formulation supported by evidence
Cast Iron & Foundry Cutting Wheels
Cast-iron and foundry cutting-wheel configurations can use silicon carbide or aluminum-oxide blends. Material, bond, reinforcement, diameter, rated speed and expected life must be defined for the quoted SKU and compared on the buyer's equipment and workpiece.
- Abrasive blend confirmed by SKU
- Bond and service-life targets tested under agreed conditions
- Reinforcement supported by the approved specification
- Diameter and machine compatibility confirmed in writing
Masonry & Stone Cutting Discs
Masonry or stone cutting-wheel configurations can use silicon carbide or other formulations. The quoted source must identify the target material, bond, reinforcement, diameter, rated speed, tool, guard and applicable safety evidence; performance and suitability are approved through representative testing.
- Target mineral material stated in the RFQ
- Grain, bond and reinforcement confirmed by SKU
- Diameter and rated speed checked against the tool
- Safety evidence verified for the quoted construction
Common RFQ Dimensions — Not Approved SKU Data
| Size | Thickness | Arbor | Rated-Speed Evidence | Application | Material |
|---|---|---|---|---|---|
| 4.5\" (115mm) | 1.0 / 1.2 / 1.6 / 2.5 / 3.2mm | 7/8\" (22.23mm) | Per SKU label and report | Metal / INOX | A/O / White A/O |
| 5\" (125mm) | 1.0 / 1.2 / 1.6 / 2.5 / 3.2mm | 7/8\" (22.23mm) | Per SKU label and report | Metal / INOX | A/O / White A/O |
| 7\" (180mm) | 1.6 / 2.0 / 2.5 / 3.2mm | 7/8\" (22.23mm) | Per SKU label and report | Metal / INOX | A/O / White A/O |
| 9\" (230mm) | 1.9 / 2.0 / 2.5 / 3.2mm | 7/8\" (22.23mm) | Per SKU label and report | Metal / INOX / Cast Iron | A/O / SiC Blend |
| 14\" (355mm) | 2.5 / 3.0 / 3.2 / 4.0mm | 1\" (25.4mm) / 20mm | Per SKU label and report | Chop saw: Metal / Masonry | A/O / SiC |
Applications
Why Choose Our Cutting Wheels
Safety Evidence by SKU
Request the applicable standard, report number, issuing body, covered dimensions, validity and label scope for the exact wheel.
Reinforcement by SKU
Layer count, mesh, construction and related safety evidence are confirmed in the approved specification.
INOX Limits by SKU
Any Fe, S or Cl limit requires applicable material or test evidence for the quoted wheel.
Comparative Cut Test
Kerf, burr, temperature, cut time and wear are compared under buyer-approved conditions.
Written Quality Plan
Dimensional, rotational, side-load or other checks and sampling are agreed per order.
Private Label Scope
Branded labels, color boxes, tins and multilingual instructions can be scoped from buyer-approved safety and channel requirements.
OEM / Private Label Capabilities
SCOTTCHEN supports OEM and private-label cutting-wheel sourcing for distributors, welding suppliers, tool brands and industrial buyers. Grain, formulation, thickness, profile, reinforcement, label and packaging options are confirmed with the responsible production source in the written quotation.
Private-label options can include shrink wrap, printed labels, color boxes, storage tins, blister packs and industrial cartons. The buyer is responsible for confirming the applicable standard, maximum RPM, safety pictograms, translations and channel barcode data; the approved artwork defines what may appear on the wheel and packaging.
Custom formulation requests require the application, workpiece, equipment, rated speed, performance targets and applicable standard. Development feasibility, samples, testing responsibility and any production commitment are confirmed in the project documents.
Frequently Asked Questions
Q1:What is the MOQ for wholesale cut-off wheel orders?
MOQ is quoted per diameter, thickness, formulation, label and packaging format. Thin wheels, INOX formulations, printed labels and retail packs can have different setup quantities. Require the quotation to identify every MOQ assumption instead of applying one website number across all cut-off wheels.
Q2:Which cutting-wheel safety documents should a buyer request?
State the target market and applicable standard in the RFQ, then request the certificate or test report number, issuing body, covered product family, dimensions, validity and label requirements for the exact quoted SKU. Do not rely on a general website statement as evidence of EN12413, ANSI B7.1, MPA, oSa or any other market requirement.
Q3:What sizes and thicknesses are available?
Common inquiry dimensions include 4" through 14" diameters, several thicknesses and different arbor sizes. Availability, dimensional tolerance, rated speed, tool and guard compatibility, production source and applicable evidence must be confirmed for the exact quoted SKU.
Q4:Can I use metal cutting discs on stainless steel?
Do not assume a general metal wheel is suitable for stainless steel. State the material, tool, guard, target standard and any Fe, S or Cl limit in the RFQ, then verify the exact INOX formulation with applicable documents and representative sample tests before approval.
Q5:How are cutting discs packaged for wholesale distribution?
Packaging can be quoted as industrial cartons, shrink-wrapped bundles, color boxes, blister packs or storage tins. The buyer must provide current safety text, translations, barcode data and channel requirements; the final label and carton scope is controlled by the approved artwork rather than an assumed marketplace-compliance claim.
Q6:What is the shelf life and storage recommendation for cutting wheels?
Shelf life, manufacture date, storage orientation and recommended-use period must follow the exact product label, responsible producer's instructions and applicable market requirements. Require these details in the approved specification and label artwork; this page does not set a universal three-year period or claim that every wheel is date-marked.
B2B Sourcing Parameters
Ready to Evaluate Our Surface Finishing Accessories?
Tool brands, distributors and online sellers can submit a scoped RFQ for component sourcing, samples and packaging approval; availability and terms are confirmed in writing.